

apt unibond
Light-curing 1-component self-etch adhesive for the production of a permanent, marginal gap-free bond between the hard tooth substance and light-curing filling / fastening material.
-
proven to be free of TEGDMA and HEMA
-
10-fold reduced enzymatic degradation
-
very high adhesion values
-
time-saving processing on the patient, therefore particularly suitable for children
-
Applicable for all etching techniques (non-etch, total-etch, selective etch etc.)
Order units: Bottle
content: 5 ml
Article number: REF 8030
els unibond
Light-curing 1-component self-etch adhesive for the production of a permanent, marginal gap-free bond between the hard tooth substance and light-curing filling / fastening material.
-
verifiably free from BisGMA, TEGDMA and HEMA
-
very high adhesion values
-
time-saving processing on the patient, therefore particularly suitable for children
-
Applicable for all etching techniques (non-etch, total-etch, selective etch etc.)
Adhesion values Dr. Uwe Blunck, University Medicine
Berlin:
Dentin
Etch & Rinse: 34.15 MPa
Self-Etch: 25.60 MPa
Melt
Etch & Rinse: 27.78 MPa
Self-Etch: 15.12 MPa
Order units: Bottle
content: 5 ml
Article number: REF 8013


els unibond sample kit
Light-curing 1-component self-etch adhesive for the production of a permanent, marginal gap-free bond between the hard tooth substance and light-curing filling / fastening material.
-
verifiably free from BisGMA, TEGDMA and HEMA
-
very high adhesion values
-
time-saving processing on the patient, therefore particularly suitable for children
-
Applicable for all etching techniques (non-etch, total-etch, selective etch etc.)
Adhesion values Dr. Uwe Blunck, University Medicine Berlin:
Dentin
Etch & Rinse: 34.15 MPa
Self-Etch: 25.60 MPa
Melt
Etch & Rinse: 27.78 MPa
Self-Etch: 15.12 MPa
Order units: Set
content:
-
1 bottle of 1 ml
-
2 tips els composite A2
-
2 tips els composite A3
-
1 tip els flow A3op.
Item number: REF 8015
els duobond
Dual-curing 2-component self-etch bond for the production of a permanent, marginal gap-free bond between hard tooth substance and (light-, self- or dual-curing) filling / fastening material.
Use for direct self-curing or dual-curing composite restorations and core build-ups as well as light-curing restorations on a composite basis.
-
verifiably free from BisGMA, TEGDMA and HEMA
-
very high adhesion values
-
ideal for use with SAREMCO els cem
-
Time-saving as no separate etching is necessary
-
Safety through chemical post-curing
Adhesion values Dr. Uwe Blunck, University Medicine Berlin:
Dentin
light-curing> 17 MPa
cold-curing> 8 MPa
Enamel
light curing> 12 MPa
cold curing> 8 MPa
Order units: Bottle (s)
content: 2 x 5 ml
Article number: REF 8012


cmf adhesive system
Light-curing 3-component adhesive with coordinated etching gel as well as primer and bond for the total-etch technique. Thanks to its optimal acid strength, cmf etch is ideal for gentle treatment. The low-viscosity primer penetrates the dentinal tubules excellently, while the glass-filled, medium-viscosity bond can be applied like a "liner bond".
cmf etch (see item number 7551 / 7559 ):
cmf prime & cmf bond:
-
verifiably free from BisGMA, TEGDMA and HEMA
-
high adhesion values
-
gentle on the pulp
-
well coordinated viscosities
-
reliable sealing thanks to good wetting and penetration behavior
Adhesion values J. Munck and B. Van Meerbeek, Leuven:
Dentine: 25.7 ± 5.8 MPa
Enamel: 30.7 ± 9.1 MPa
Order unit: Bottle (s)
Contents:
cmf prime: 2.5 ml
cmf bond: 3 ml
cmf prime stock package: 4 x 2.5 ml
cmf bond stock package: 4 x 3 ml
Article number:
cmf prime REF 7552
cmf bond REF 7553
cmf prime stock package REF 7554
cmf bond stock package REF 7555
cmf etch syringe
Gentle etching gel for the total etching technique. Thanks to the buffering, enamel and dentin can be etched for the same time. Lower risk of overetching with subsequent drying of the dentin (optimized acid strength).
-
Total-etch technique (etches quickly, thoroughly and gently)
-
wets dentin and enamel without forming / flowing droplets
-
easily rinsed off
-
targeted application thanks to the fine application needle
-
steadfast
-
can be precisely dosed
-
excellent wetting
-
the increased pH value is gentle on the dentin and enamel
-
Risks like dehydration / collapse of the collagen fibers are reduced
-
optimized acid strength
-
same long etching of enamel and dentin thanks to buffering
-
lower risk of overetching with subsequent drying of the dentin
Order units: Syringe
Contents: 2.5 ml
Article number: REF 7551


cmf etch refill syringe
Gentle etching gel for the total etching technique. Thanks to the buffering, enamel and dentin can be etched for the same time. Lower risk of overetching with subsequent drying of the dentin (optimized acid strength).
-
Total-etch technique (etches quickly, thoroughly and gently)
-
wets dentin and enamel without forming / flowing droplets
-
easily rinsed off
-
targeted application thanks to the fine application needle
-
steadfast
-
can be precisely dosed
-
excellent wetting
-
the increased pH value is gentle on the dentin and enamel
-
Risks like dehydration / collapse of the collagen fibers are reduced
-
optimized acid strength
-
Enamel and dentin are etched for the same length of time thanks to buffering
-
lower risk of overetching with subsequent drying of the dentin
Order units: Syringe
Contents: 25 ml
Article number: REF 7559
combi-package els duobond / els cem
els duobond
Dual-curing 2-component self-etch bond for the production of a permanent, marginal gap-free bond between hard tooth substance and (light-, self- or dual-curing) filling / fastening material. Use for direct self-curing or dual-curing composite restorations and core build-ups as well as light-curing restorations on a composite basis.
-
verifiably free from BisGMA, TEGDMA and HEMA
-
very high adhesion values
-
ideal for use with Saremco els cem
-
Time-saving as no separate etching is necessary
-
Safety through chemical post-curing
els cem
Light- and chemically-curing (autopolymerizing), radiopaque composite luting cement for the permanent cementation of inlays / onlays, crowns, bridges, root posts and screws. els cem can be used for indirect restorations made of composite, metal or ceramic / zirconium oxides.
-
proven to be free from TEGDMA, HEMA and BisGMA
-
Double syringe with special mixing cannula for optimal mixing ratio and precise application
-
with universal color
Order units: Set
content:
-
1 bottle els duobond base à 5 ml
-
1 bottle els duobond catayst à 5 ml
-
1 syringe els cem of 10 g
Item number: REF 7866
